Author Topic: Latest pre-built libpinproc Windows package (ver 1.2)  (Read 3224 times)

Gerry Stellenberg

  • Administrator
  • *****
  • Posts: 2399
    • View Profile
    • PinballControllers.com
Latest pre-built libpinproc Windows package (ver 1.2)
« on: February 24, 2010, 10:28:03 PM »
Version 0.9 of the Windows installer is now available for download from the P-ROC software page.

Version 0.9 includes:

- Auxiliary Bus support
- PulsedPatter support
- Switch rule 'reload' timer support

- Gerry
« Last Edit: November 07, 2012, 09:39:20 PM by Gerry Stellenberg »

Gerry Stellenberg

  • Administrator
  • *****
  • Posts: 2399
    • View Profile
    • PinballControllers.com
Re: Latest pre-built libpinproc Windows package (ver 0.91)
« Reply #1 on: March 06, 2011, 03:31:20 PM »
Version 0.91 of the Windows installer is now available for download from the P-ROC software page.

Version 0.91 enhancements include:

- FTDI FTD2XX Driver 2.08.12
- Better aux bus support
- Enhanced swith rules that can automatically check the switch states when programmed.
« Last Edit: March 06, 2011, 03:46:31 PM by gstellenberg »

Gerry Stellenberg

  • Administrator
  • *****
  • Posts: 2399
    • View Profile
    • PinballControllers.com
Re: Latest pre-built libpinproc Windows package (ver 0.91)
« Reply #2 on: July 22, 2011, 03:04:00 PM »
Version 1.00 of the Windows installer is now available for download from the P-ROC software page.

Version 1.00 enhancements include:

  • FTDI FTD2XX Driver 2.08.14
  • Updated 'pinprocfw' utility with support for the '.p-roc' file format.
  • Addition 'drive_outputs_now' parameter for PRSwitchUpdateRule
  • Fixed addressing for reading switch states

Gerry Stellenberg

  • Administrator
  • *****
  • Posts: 2399
    • View Profile
    • PinballControllers.com
Re: Latest pre-built libpinproc Windows package (ver 1.1)
« Reply #3 on: February 20, 2012, 10:15:19 PM »
Version 1.1 of the Windows installer is now available for download from the P-ROC software page.  This includes the 1.1 releases of libpinproc and pypinproc and the 2.08.14 version (unchanged from version 1.0) of the FTDI USB driver.

Many thanks to Compy for building this installer!

Gerry Stellenberg

  • Administrator
  • *****
  • Posts: 2399
    • View Profile
    • PinballControllers.com
Re: Latest pre-built libpinproc Windows package (ver 1.2)
« Reply #4 on: November 07, 2012, 09:40:41 PM »
Version 1.2 of the Windows installer is now available for download from the P-ROC software page.  This includes the 1.2 releases of libpinproc and pypinproc and the 2.08.14 version (unchanged from version 1.1) of the FTDI USB driver.

This installer should work on both 32-bit and 64-bit versions of Windows.

Once again, thanks to Compy for building this installer!
« Last Edit: November 08, 2012, 12:57:50 PM by Gerry Stellenberg »