Author Topic: First Steps for make a pinball  (Read 194 times)

nonik

  • Newbie
  • *
  • Posts: 3
    • View Profile
First Steps for make a pinball
« on: January 17, 2017, 11:50:14 AM »
Hi! my name is Juan, i come from Spain.

First, sorry for my english, is very very bad. :|

i had spent months looking for make a pinball, but, i have many doubts.

I want to start easily as possible, and, after, increase the difficult.

i have been many years programming account programs in delphi, and i think i dont have problem to learn a new software for this, but, the "physical" i dont know nothing.

This, I think, start with...

A white panel with two flippers, two bumpers and two slingshot, and, start with the computer to connect this, and sum points and controller the number of the ball... start and end game... (for example).

but, if is good this way.... how can i do it?

I bought the flippers and the power supply, but, i dont know how connect all, and, the best important, i dont know what can i need to buy for connect and start with the programming.

What do you think?


Thanks in advance!



nonik

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: First Steps for make a pinball
« Reply #1 on: January 21, 2017, 05:12:17 AM »
Hi?

 :'(

MOcean

  • P3 Developers
  • *
  • Posts: 820
  • Michael Ocean
    • View Profile
Re: First Steps for make a pinball
« Reply #2 on: January 22, 2017, 08:11:54 AM »
Hi Juan,

Welcome! 

I think this thread is probably one of the best resources on the subject:

http://www.pinballcontrollers.com/forum/index.php?topic=578.0

I recommend you give that thread a good read through.  It will probably cause you to have more specific questions, but when you have them, post away!

- Michael

nonik

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: First Steps for make a pinball
« Reply #3 on: January 23, 2017, 11:19:42 AM »
Thanks Michael! i will read all

:)


Thanks!